Use:
This machine set is used for producing LDPE stretch film,which is equipped with single screw.The extruded stretch film is with both sides adhesive.If the machine adopts double screws,the two hoppers should use different type of material,thus one side of the extruded stretch film is adhesive and the other side without.It is widely used for packing architecture and hardware parts etc.
Characteristics:
1.Screw and cylinder are all made of 38CRMOALA alloy and treated by nitrogen.It has advantages of corrosion resistance and endurance etc.
2.The cooling device adopts cycle water cooling provide the best transparent effect of the stretch film.
3.Take-up equipment adopts friction type rewinding, with edge correcting device to ensure the quality.
Main Technical Variables:
This machine set is used for producing LDPE stretch film,which is equipped with single screw.The extruded stretch film is with both sides adhesive.If the machine adopts double screws,the two hoppers should use different type of material,thus one side of the extruded stretch film is adhesive and the other side without.It is widely used for packing architecture and hardware parts etc.
Characteristics:
1.Screw and cylinder are all made of 38CRMOALA alloy and treated by nitrogen.It has advantages of corrosion resistance and endurance etc.
2.The cooling device adopts cycle water cooling provide the best transparent effect of the stretch film.
3.Take-up equipment adopts friction type rewinding, with edge correcting device to ensure the quality.
Main Technical Variables:
| Model | XYSJ-60 |
| Screw Diameter | Φ55mm |
| Screw L/D ratio | 30:1(L/D) |
| Width of products | 200-550mm |
| Thickness | 0.015-0.03mm |
| Output | 30KG/H |
| Main motor power | 15KW |
| Heating power | 30KW |
| Weight of machine | 3T |
| Overall Dimension(L*W*H) | 6000*1500*2500mm |
| Power supply | 380/3/4/50(Volt/Ph/Line/Hz) |
| Quotation FOB(Ning bo) | 18,300USD |