Plastic Extrusion/Blown Film Machine/PVC/Injection Machine Cooled Chiller
Features:
1. High Efficiency
Ø Using high efficiency scroll compressor, low power consumption, large cooling capacity.
Øhell and tube condenser and evaporator, high efficiency, easy to clean, avoid condenser high pressure and evaporator freezing.
2.Reliable operation
Ø 7 safeguards can ensure the chiller stable operation.
Ø The chiller is designed for multi-circuit and multi-compressor. When a single compressor fails, the other compressor can still operate normally.
3. Intelligent Control
Ø Intelligent microcomputer controller, provides simplest and thoughtful operation interface, send feedback of maintenance information timely.
Ø The chiller control system can be connected to the user's central control system, user can check the operation status at any time.
4. Easy Installation and Maintenance
Ø The chiller is filled with refrigerant and lubricating oil before leaving the factory. The user only needs to connect the inlet and outlet pipes and the power supply to run.
Ø The control interface directly displays the fault item, which is convenient for timely know the faults and elimination.
5. Provide customized service
Ø We provide R22, R407, R134a refrigerant options according to customer needs.
Ø We can also produce other
power supply chillers and
special units such as anti-corrosion
and explosion-proof
according to customer requirement.
Specification
for injection cooled chiller, just parts of data showed below,for customized information pls feel freely to contact our
salesman
Model SHR- | 03AI | 05AI | 08AI | 10AI | 12.5AI | 15AI | |||||||||||||
Refrigerant | R22 | R407C | R134a | R22 | R407C | R134a | R22 | R407C | R134a | R22 | R407C | R134a | R22 | R407C | R134a | R22 | R407C | R134a | |
Nominal Cooling Capacity | ×1000kcal/h | 8.5 | 8.1 | 5.6 | 12.6 | 12.3 | 8.7 | 20.4 | 20.2 | 13.3 | 27.1 | 26.4 | 18 | 30.9 | 30.3 | 20.4 | 39.7 | 38.6 | 26.7 |
KW | 9.9 | 9.4 | 6.5 | 14.7 | 14.3 | 10.1 | 23.7 | 23.5 | 15.5 | 31.5 | 30.7 | 20.9 | 35.9 | 35.2 | 23.7 | 46.2 | 44.9 | 31.1 | |
Input power(kw) | 3.49 | 3.49 | 2.69 | 5.03 | 4.93 | 3.63 | 8.38 | 8.48 | 6.48 | 11.02 | 10.92 | 8.22 | 12.02 | 11.92 | 9.12 | 15.3 | 15.3 | 11.5 | |
Comp.input Power (KW×QTY) | 2.7×1 | 2.7×1 | 1.9×1 | 4.1×1 | 4×1 | 2.7×1 | 6.1×1 | 6.2×1 | 4.2×1 | 8.2×1 | 8.1×1 | 5.4×1 | 9.2×1 | 9.1×1 | 6.3×1 | 12.4×1 | 12.4×1 | 8.6×1 | |
Chilled Water pump Model | 1DK20 | 1DK20 | GD40-20 | GD40-20 | GD40-20 | GD50-17 | |||||||||||||
Chilled Water pump power(KW) | 0.55 | 0.55 | 1.5 | 1.5 | 1.5 | 1.5 | |||||||||||||
Comp.current(A) | 6.6 | 6.7 | 5.5 | 9.57 | 9.75 | 7.65 | 16.65 | 17.05 | 14.75 | 20.6 | 20.7 | 17.5 | 22.2 | 22.2 | 17.9 | 30.8 | 31.7 | 28.2 | |
Power Supply | 3Phase-380V-50Hz | ||||||||||||||||||
Protection Device | Reverse phase protection,phase loss protection,overcurrent protection,high and low voltage protection,low temperature protection,water flow protection | ||||||||||||||||||
Number Of Refrigeration Circuit | 1 | ||||||||||||||||||
Capacity Control(%) | 0,100 | ||||||||||||||||||
Condenser | Ripple Aluminum Finsaround Copper pipe | ||||||||||||||||||
Power input of Fan(KW) | 0.24 | 0.38 | 0.78 | 1.32 | 1.32 | 1.4 | |||||||||||||
Evaporator | Coil type | Shell-and-Tube Type | |||||||||||||||||
Water Side max Pressure(MPa) | 1 | ||||||||||||||||||
Dia.of pipe to Evaporator(inch) | 1″ | 1″ | 1-1/2″ | 1-1/2″ | 1-1/2″ | 2″ | |||||||||||||
Cooling Water Flow(L/min) | 28.4 | 26.9 | 18.6 | 42.1 | 41 | 29 | 67.9 | 67.4 | 44.4 | 90.3 | 88 | 60 | 102.9 | 100.9 | 67.9 | 132.4 | 128.7 | 89.2 | |
Evaporator Water Pressure drop(kPa) | _ | _ | 17 | 23 | 28 | 30 | |||||||||||||
Running noise Db(A) | 72 | 72 | 75 | 75 | 75 | 75 | |||||||||||||
Tank Volume(L) | 80 | 80 | 180 | 180 | 180 | 180 | |||||||||||||
Total Weight(kg) | 130 | 170 | 430 | 470 | 510 | 560 | |||||||||||||
Note: | |||||||||||||||||||
1. Nominal cooling capacity based on: Air dry/wet bulb temperature 35°C/24°C, Evaporator inlet and outlet water temperature 17ºC/12ºC, Fouling coefficient 0.088m2.ºC/KW; 2. Chilled water temperature range: 5ºC ~ 20ºC; R134a: 5ºC ~ 25ºC; 3. Ambient temperature range: 5ºC~43ºC;R134a:5ºC~50ºC; 4. Specifications and dimensions will be subject to change without notice. |
Successful Cases
we build relationship with customers from everywhere.
About us
Under the Chinese policy-ONE BELT ONE ROAD,China connects closly with the world,Meanwhile,Products Made-in-
China plays important role in international market.
SANHE Freezing Machinery (Guangzhou)Co., Ltd. is a joint venture which was established by domestic Huizhuo and
Japan Ronghe corporation with a total investment of 50 million Yuan . It located in Guangzhou Economic and Tech-
nological Development Zone . Combined with Japan R&D center and Guangdong University of Technology, We are
committed to industrial chiller, central air conditioner, chiller manufacturer,magnetic centrifugal chiller R&D and manufacture.
10000 square meter land covered area,above 70% employees owns undergraduate or doctor degree.
Testing Line
All products exported from our company are strictly tested before send out. company builds test line which similar to customers'real environment
Certificates
CE & ISO9001&14001 & AHRI & BV & ENVIRONMENT approved
Core accessory
company use international brand spare parts,like siemens and emerson ......
Packing&Shipping
Plastic film+standard export plywood case with forklift truck feet, easy to load and unload Shipping by sea, by truck, or by train

After-sales service
12 months quality warranty since the date of delivery.
Free of charge to replace new chillersif quality problems.
Cost price to buy extra parts with Chillers from Sanher if needed.
Video technical support
Online support(Email, Skype, Wechat, Whatsapp, Telephone...)
Engineers available to service machinery overseas if needed
Necessary info to Quote
1. What is your cooling capacity? _____ Kcal/hr or _____KW or _____RT?
2. What's your power supply? For example: 3800V-50Hz-3N (N=Phase )
3. What refrigerant type do you require? R22 or R134a or R407c?
4. What's your ambient temperature? And what is your chiller inlet and outlet water temperature?
5. Which industry do you use the chiller in?
FAQ
Q1: Are you a manufacturer?
A1: Yes, we have more than 10 years in water chiller business. New plant was bulit in 2017 in Guangzhou Economic&Technological Development Zone. Welcome to visit us anytime!
Q2: Could you help us to recommend the model for our project?
A2: Yes, we have engineer to check the details and make the scheme for you. Based on the following:
1)Cooling capacity;
2) Refrigerant;
3) Ambient temperature;
4)Voltage;
5) For what industry
6)The building drawing(if you have)
7)Any other special requirements.
Q3: How to ensure your product with good quality?
A3: We use the well-know brand accessories, such as Hanbell, copeland, danfoss compressor, Emerson expansion Valve, Siemens controller. All SANHER chillers are factory tested under load conditions to ensure good quality and easy installation for users.
Q4: What's the warrenty?
A4: 1 year warrenty for free if confirmed by both side damage in the quality reason.
Q5: Whats your payment term?
A5: We accept TT, LC, Western Union, etc. Normally, 30% deposit for production, 70% balance before shipment.
Q6: How can I place an order?
A6: Contact us via made in China or contact below information.
Livia
0086 13590226431