5 gallon plastic barrel/plastic extruder/extruder blow molding machine

   Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine                                            Extruder MachineDetailed Descriptation1. Electronic control system: Japanese mitsubi

Featured Products

   Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine
                                            Extruder Machine


Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine/Extruder Machine
Detailed Descriptation

1. Electronic control system: Japanese mitsubishi PLC computer and human interface (Chinese or English) control, color touch operation screen operation, modular temperature control.
All process Settings, changes, retrieval, monitoring, fault diagnosis and other functions are implemented on the touch screen without point contact working principle and components are durable.
2. Hydraulic system: proportional hydraulic control, equipped with imported famous hydraulic valve and oil pump, stable and reliable.
3. Plasticization system: high efficiency plasticizing and mixing screw, ensure the plasticization is sufficient and even.
4. Speed regulating system: variable frequency speed adjustment + alloy steel hard tooth surface reduction box, speed adjustment is stable, energy saving, noise low, durable.
5. Open mold mechanism: the opening and closing mode and the sliding mechanism of the locking die are in the guide rail with ball bearings, with the precision of the micrometer level.
The positioning precision is high, easy and energy saving, and it is not deformed.
Patented products: two - rod, single - cylinder bidirectional synchronous open die center locking mechanism, good product stability.
6. Ejection: independent single (large) oil cylinder ejection, ensure the same degree of concentricity of the shot material, avoid the non-synchronous phenomenon of double cylinder.
In this paper, the thickness of the pressure wall of 10 sections of the same technology was improved, and the width difference of the blanks was changed, and the thickness uniformity of the product was improved effectively.
7. Die head: all adopt 38CrMoAIA,42CrMoV, 35CrMo, etc., which are made of fine processing and heat treatment.
8. changing the mold, die ditto the machine can lift at the same time, and can move backward and forward (hydraulic control), easy to install all kinds of mold room, lift die head, facilitate production is sort of die and mould spacing, excess stock at least.
9. Low energy consumption: the production rate is about 70%, and the energy consumption is 26.6KW·h is less than the original model.


Technical Parameter
Max. Product Volume  (L)25
StationSingle
Dry cycle  (PC/H)600
Screw Diameter    (MM)82
Screw L/D Ratio   (L/D)38(30)
Screw Drive Power (KW) 
Screw Heating Power (KW)41.7
No.of heating zone (Srew)8
Output of HDPE (kg/h)160(pc)
Hydraulic pump driving power (KW)45
Clamping force (KN)215
Platen distance (MM)350~780
Max. Size of Mold  (W*H)(mm)550*650
Capacity of Accumulator head (L)1.9
Max.Die Diameter (mm)150
Die heating power  (KW)11.3
No.of heating zone (ZONE)4
Blowing pressure (Mpa)1.2
Air consumption  (M/MIN)1.0
Cooling water  pressure (Mpa)0.3
water consumption  (L/Min)150
Size of machine  (L*W*H)(m)6.3*2.2*3.8
Weight of machine  (TON)12

Detail Show


Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine/Extruder Machine
Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine/Extruder Machine
Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine/Extruder Machine


Production Shop
Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine/Extruder Machine




Packing & Shipping
 

1.    The machine body is covered by waterproof film firstly, and then fixed on exported wooden pallets with bolts and wires.

2.    The electric controlling parts and spare parts are loaded separately in wooden box.

3.    The auxiliary equipments are packaged in wooden box as well.

4.    All wooden material is fumigation certificated and safe for exporting to all over the world. 
Blow Molding Machine for 5 Gallon Plastic Barrel/Plastic Extrusion Machine/Extruder Machine

After-sales service

1. We offer you the free machine operation training happened in China.

2. Offering the free testing and installing of the machine in the buyer factory, but the fee of the visa, the ticket, food and living should be in the buyer's charge.

3. The spare parts of the machine and the auxiliary machine can be supply by us.

4. The guarantee of the machine is one year under the normal operation.

5. We offer the customer the technology for free for all life time.



Any question,please call me. 
MOB&waspp: +8613773240086






 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours