Blow Molding Machine/Blow Plastic Machine/Blow Bottle Machine/Full Automatic Accumulator Blow Molding Machine
The 50L drums, tool boxes and auto parts series consists of JMX90N Blow molding Machines., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 7L while volume of products can be 50L. Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
Setting:
Clamping----------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
The 50L drums, tool boxes and auto parts series consists of JMX90N Blow molding Machines., which can be used for producing drums, tool boxes and hollow parts of all kinds. Materials of PE, PP, and ABS can be used. Maximum capacity of accumulator head can be 7L while volume of products can be 50L. Its control system adopts closed loop control imported from Europe and hydraulic system is pressure-flow double proportional control equipped with variable plunger pump to ensure fast and smooth operation of the machine and energy consumption of the hydraulic system can be reduced by 30% or above, saving considerable electricity.
The Machine Can Produce all kinds of PE Container, such as PE Bottles, PE Barrels, PE Kettles etc.
Setting:
Clamping----------Double station+Hight-precision guide+large arm cylinder axle
Extrusion system--Hard gear surface reducer+Japan inverter
Die system--------Central-incoming extrusion die with special steel
Hydraulic system--Japan hydraulic valve seal and proportional control
Control system----Japan PLC+Imported HMI+PLC automatic
| Specifications | Units | KLS120-250L |
| Material | PE.PP.ABS...... | |
| Max container capacity | L | 250 |
| Output(Dry Cycle) | Pc/hr | 280 |
| Machine dimension(L×W×H) | M | 7.8×3.0×5.4 |
| Total weight | ton | 38 |
| Clamping unit | ||
| Clamping force | KN | 900 |
| Platen opening stroke | mm | 800-1800 |
| Platen size | mm | 1350×1800 |
| Max mould size(W×H) | mm | 1200×1780 |
| Mould thickness | mm | 700-1600 |
| Power | ||
| Max drive | KW | 155 |
| Total power | KW | 237 |
| Fan power for screw | KW | 16.2-23.6 |
| Air pressure | Mpa | 0.8 |
| Air consumption | m³/min | 1.8 |
| Average energy consumption | KW | 60 |
| Motor power for pumps | KW | 45 |
| Extruder unit | ||
| Screw diameter | mm | 120 |
| Screw L/D ratio | L/D | 28 |
| Plasticizing capacity | Kg/hr | 320 |
| Number of heating zone | zone | 6 |
| Extruder heating power | KW | 36 |
| Extruder driving power | KW | 110 |
| Die-head | ||
| Number of heating zone | Zone | 6 |
| Power of die heating | KW | 30 |
| Max die pin diameter | mm | 620 |
| Accumulator capacity | L | 25 |