Large Extrusion Thermoplastic Road Marking Machine

KD-DRZ J-I Big Extrusion Thermoplastic Road Marking MachineThis machine can mark both multi-dot line and flat line. It is a type of general machine which is flexible to operate and has the better effects of vibrating, reflect and drainage.Main Feature:1. Engine: The 45HP water-cooled electric startup diesel engine with four cyli

Featured Products

KD-DRZ J-I Big Extrusion Thermoplastic Road Marking Machine
This machine can mark both multi-dot line and flat line. It is a type of general machine which is flexible to operate and has the better effects of vibrating, reflect and drainage.


Main Feature:

1. Engine: The 45HP water-cooled electric startup diesel engine with four cylinder in-line, low noise and environmental protection. The fuel tank's cubage is 60L...
2. Driving system: Variable speed transmission makes it easy to operate in forward, back off and stop. Driving speed: Forward 0-22km/h, back off 0-12km/h. Max climbing capability: 15 degree
3. Heating: Infrared propane heating, electronic ignition and conduction oil heating together save 30% fuel compared with traditional heating way, which make the heating evener, quicker, more secure and more environmental.
4. Marking way: Equipped with extrusion marking device at the left and right, which can mark both multi-dot line and flat line. The multi-dot line can be divided into two type(dot model and row model) according to the needs of users. The device has high working efficiency and reliability. The beginning and ending points of the marked line is very precise.
5. Glass bead spraying system: Single pressurized 60L glass beads bin with a window. The single or double glass beads spraying guns at the left(or right) which can adjust pressure, flow rate and spray width ensure the sprayed glass beadsevener, more deep-set and more economical.
6. Electronic control: Setting multi-function interface, and when the machine out of factory, set marking standard according to the requirements of the users, and the line type and its length can be freely adjusted to meet the users' needs during construction. At the same time, the intellective control can be realized. Continuous line and broken line can be done together in the same program.
7. Paint tank: Made of cold-rolling anti-oxidation steel heated by conduction oil. Equip with hydraulic horizontal blade stirring system. Capacity: 500L.
8. Air compressor: 0.6 m3/min displacement piston air compressor with relief valve. The pressure in the tank is adjustable.
9. Warning system: Equip with double frequency adjustable warning lights. The electric warning arrow at the back( the flash direction is adjustable) improves the safety of road marking work.
10. Guide rod: Adjustable guide rod, which makes up, down, left and right easy.
11. Pre-mark system: Option for pre-marking system. Finish the pre-marking work for other line during spraying work, which greatly improves the efficiency of road marking construction.
12. The seat can overturn, easy for the operation and maintenance. The operation system and related system can stretch on both sides to meet difference customers' needs.
13. Size & Weight: 4450mm (L) × 1250mm (W) × 2180mm (H). 2700kg.

This machine can choose scrape shoe, to realize the scrape marking line.
This machine can choose the pre-heater, in order to transport the materials.
Big Extrusion Thermoplastic Road Marking Machine
Big Extrusion Thermoplastic Road Marking Machine
Big Extrusion Thermoplastic Road Marking Machine
Big Extrusion Thermoplastic Road Marking Machine

Big Extrusion Thermoplastic Road Marking MachineBig Extrusion Thermoplastic Road Marking MachineBig Extrusion Thermoplastic Road Marking MachineBig Extrusion Thermoplastic Road Marking MachineBig Extrusion Thermoplastic Road Marking Machine
 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours